65MM X 5MM Seal

65MM X 5MM SealThis steel bucket pin shim is for a pin with an outer diameter of 65 mm. It is 5 mm thick with an OD of 130 mm. Perfect for when you have space between your bucket ears and your machines hook up. Too much of a gap will cause your Bucket to wobble or chatter around on your machine causing wear and tear on your pins and bushings. A bucket pin shim will work just fine if it is a little larger than the Outer Diameter of your pin but not if it is smaller

This bolt on End Bit has an industry standard part number of 8E9379 and has 4 bolt holes

This is a solid case-hardened pin

CRIMP ON TOOTH 8075F

This is a V23tvy Esco style Super V twin pointed bucket tooth

Typical mesh back "trucker" style ball cap

This is a 27lk Vkit lock set for use with 27syl series bucket teeth

End greasing frustration with the original locking grease coupler

1/2" x2" hex cap bolts and nuts

Use a p410 pin with this tooth

Dust seal for 70mm Bucket Pin/Boss that measures 70mm x 85mm x 4mm also known as 07145-00090

This bolt on End Bit has an industry standard part number of X400041 and has 2 bolt holes

This is a genuine ESCO Ultralok replacement lock for all u35 series teeth